|
|
Search results for "Multi-stage vacuum generators pvp" Vuototecnica
|
Multi-stage vacuum generators PVP 12 MX / MXLP
This range of multiple ejector vacuum generators offers increased suction flow rate, given the same compressed air consumption, than single-stage models.
Supply pressure goes between 4-6 bar, for items MX and between 1-3 bar, for MXLP. The capacities go from 10.5 to 31 m3/h. They are fully made with anodised aluminium, with stainless steel ejectors and screws. The EPDM seals, the silicone reed valves and the vacuum gauge are provided as standard. They are equipped with additional intake connections for increased points of usage or control tools.
The suctioned air discharge connections are threaded to allow for installation, upon request, of “free-flow” SSX high sound damping silencers.
Product codes: PVP12MX PVP12MXLP
|
|
|
|
Multi-stage vacuum generators PVP 25 MX / MXLP
Product codes: PVP25MX PVP25MXLP
|
|
|
|
Multi-stage vacuum generators PVP 40 M / MLP ÷ PVP 300 M / MLP
Created to be assembled on OCTOPUS gripping systems, this series of generators is available with suction capacities between 24 and 320 m3/h. The supply pressure goes from 4-6 bar for M items and from 1-3 bar for MLP items. Level of vacuum and flow rate can be adjusted according to the supply air pressure.
Characterised by their new generation of ejectors, boasting an excellent ratio between the quantity of air consumed and that suctioned, benefiting operational consumption. The silencers are built into all generators.
They are fully made with anodised aluminium, with stainless steel ejectors and screws.
EPDM or FKM seals and reed valves upon request.
Low maintenance and simple scheduled filter cleaning.
Product codes: PVP40M PVP70M PVP100M PVP40MLP PVP70MLP PVP100MLP
|
|
|
|
Multi-stage vacuum generators PVP 140 M / MLP, PVP 170 M / MLP and PVP 200 M / MLP
Product codes: PVP140M PVP170M PVP200M PVP140MLP PVP170MLP PVP200MLP
|
|
|
|
Multi-stage vacuum generators PVP 250 M / MLP and PVP 300 M / MLP
Product codes: PVP250M PVP300M PVP250MLP PVP300MLP
|
|
|
|
Multi-stage vacuum generators PVP 25 MDX / MDXLP, PVP 35 MDX / MDXLP and PVP 50 MDX / MDXLP
This line of generators is available with suction rates between 20 and 103 m3/h. The supply pressure goes from 4-6 bar for MDX items and from 1-3 bar for MDXLP items. The maximum level of vacuum is -90 KPa.
Characterised by their new generation of ejectors, boasting an excellent ratio between the quantity of air consumed and that suctioned, benefiting operational consumption. They are fully made with anodised aluminium, with stainless steel ejectors and screws. The tightness seal is made from EPDM, while the reed valves are made as standard and in FKM, upon request. The “free-flow” SSX high sound damping silencers installed as standard on the air exhaust. They are equipped with additional threaded connections for increased points of usage or for the installation of measurement or control tools.
Upon request, can be supplied with a compressed air energy savings kit ES (ENERGY SAVING SYSTEM), composed of a pneumatic vacuum regulator, a pneumatic coaxial shutter supply valve, a check valve and necessary tubing.
Product codes: PPVP25MDX PVP35MDX PVP50MDX PVP25MDXLP PVP35MDXLP PVP50MDXLP
|
|
|
|
Multi-stage vacuum generators PVP 60 MDX / MDXLP and PVP 75 MDX / MDXLP
Product codes: PVP60MDX PVP75MDX PVP60MDXLP PVP75MDXLP
|
|
|
|
